The right needle for your desired embroidery result
Why adjust the needle to the thread and base material? Choosing the right needle helps to achieve the desired embroidery result. The choice of needle essentially depends on the base material to be embroidered and the choice of the thread. A wrongly chosen needle can cause thread breakage, "thread balls", skipped stitches, material damage, puckering or an irregular embroidery appearance.
MADEIRA offers the right embroidery needle for industrial multi-head and single-head embroidery machines and every available thread. Not only do we help you choose the right needle for the job, but we also give you useful tips about needle settings and our assortment. On each of our shade cards you can find the most suitable needle size and shape for your MADEIRA embroidery thread.
Two needle systems to choose from
Needle system DB x K5
The DB x K5 needle system was developed for high-performance multi-head embroidery machines. It is the universally usable system with the highest stability. The purpose of the developers was to reduce skipped stitches and thread breakage as well as material damage and looping.
Needle system Brother PR
Brother PR semi-professional single-head embroidery machines require a different needle system. For this purpose, MADEIRA offers needles in sizes 65, 75, 90 and 100, with which all MADEIRA threads can be processed.
Available needle size for Brother PR RG needle tips:
Brother 130/705H RG 65/9
SAN1 GEBEDUR - DB x K5
Available needle sizes for RG / SAN 1 needle tips:
With GEBEDUR Surface Coating
Medium Ball Point - DB x K5
Available MADEIRA needle size for FG needle tips:
Slight ball point - DB x K5
Available needle sizes and variations for FFG needle tips:
Nm 75/11 (standard needle)
SAN 8 FFG 80 /12
Round tip with small ball point - DB x K5
Available needle sizes for RG needle tips:
Normal round tip - DB x K5
Available needle sizes for R type needle tips:
When to use...
SAN 8 FFG 80/12 is an alternative to using DBxK5 Nm 90/14. Size 80 is a thinner needle with a bigger needle eye for use with fine fabrics. We recommend needles with R-points for embroidery on leather/faux leather.
Tips for cap embroidery
The choice of needle size for various threads and thicknesses may differ in cap embroidery - if necessary, do not use the finest needle proposed in each case, but select the next size up, or even the next biggest one. Where necessary, speak to your machine supplier for more detailed information. Here, we also recommend SAN 1.
About RG/SAN 1 needles
SAN 1 with RG-point needles have an extremely hard GEBEDUR surface coating: the titanium nitride coating provides higher wear and tip protection. SAN 1 stands for a special needle shaft geometry, which ensures greater stability. For 3-D embroidery with foam materials, SAN 1 is also a good alternative.
How to set the right needle position
It is very important to always adjust and set the needle right. You´ll find a small notch at the needles eye for orientation. This notch has to face the front with 5 degrees to the right, so it gets easier for the Looper to grab the thread.